Create custom lighting effects with this 44-key IR remote control and LED control unit. It's specifically designed to work with 12V and 24V DC RGB LED flexible strips, and allows you to adjust brightness, customize light color, set fade in/out, and adjust flash rate. IR remote control uses a CR2025 battery (not included) and requires a 12V or 24V DC power source (not included).

The 44-key infrared controller adopts the advanced micro control unit; it is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light, flexible light strip, wall washer lamp, and glass curtain wall light and so on; it has many advantages such as low price, easy connection and simplicity to use. Meanwhile, you could adjust brightness, static color choices and various dynamic changes in lighting effects through infrared remote control. Besides, you also could adjust random color by yourself freely. In addition, this product has short circuit protection function to make sure the load working normally.

Highlights:

 Choose your own lighting: With this IR remote touch control 44 keys, you could adjust brightness, static color choices and various dynamic changes in lighting effects. Adopts the advanced micro control unit, applicable to a variety of constant voltage LED lamps.

 Variety of options to choose from: You can choose between many different solid colors, solid white, flashing, strobing, adjust brightness, and on/off all from the wireless remote. There are 28 modes in total, including 20 static and 8 dynamic changes; The brightness of static color and the speed of dynamic changes are adjustable. Output to RGB three channels, each allow a maximum current of 2A.

Features:

• Energy efficient and stable power supply with wireless remote.
• No mercury, UV, IR or other deleterious radiation.

How does it work?

1. Connect the load wire at first, following by the power wire; Please ensure short circuit cannot occur between connecting wire before you turn on the power.

2. When operating, you will hold on the remote control in straight front of infrared receiver to ensure that there is no barrier between the remote control and receiving head.

3. When users wants to set the DIY color, the first time you push the DIY button it will enter customize color mode immediately. Press the six buttons on the controller to increase/reduce brightness of static red , static green ,static blue ( press any key except the DIY button can escape out of customize mode ,and the previous press is invalid ). 

The second time you push the DIY button, the current color value will be saved . When the DIY button is pressed the next time, it will show the recent saved color. There are 6 DIY key on the remote for you to set up six color freely, and the button are individual not interactional. For instance, press 1-key for one time, then press 2-key, and 1-key is invalid, so you should press 2-key again to save the current color value