| Output Power | 5V-150 | 12V-360 | 24V-720 W |
| Output Current | 6 A |
| Max. Output Current | 30 A |
| Input Voltage | 5-24 Vdc |
| Output Channel | 5 |
| Color | RGBW |
| Dimmable? | No |
| Operating Temperature | -4 ~ 140 °F |
| Casing Color | Black |
| Material | Aluminum |
| Installment | Surface / Flush Mounted |
| screw holder? | Yes |
| Connection Type | Terminal Block |
| Tactile? | No |
| Use | Indoor / Outdoor |
| LED Indicator | No |
This LED amplifier operates with PWM (Pulse Width Modulation), that is, each time you add an LED amplifier, the number of connected LEDs can be more than doubled, and you can connect numerous amplifiers. The amplifier receives the dimmed signal from the LED input and amplifies it, sending 6A per output.
Using an LED amplifier improves the system with load capacity with minimal delay and can maintain cascade synchronization. They are necessary when the load capacity of the LED driver has been exceeded, so they are used to increase the load and extend the signal in linear meters, achieving more homogeneous effects and at greater distances without parallel cable routing.
By adding an RGBW LED amplifier, you can connect more than twice the number of RGBW LED lights and additionally control multiple lighting functions using the same RGBW LED controller.
With this RGBW LED amplifier, you can drive up to 720W (24V) and 6A (or less) of RGBW LED lights per output or channel.
Related products
