| Output Power | 5V-80 | 12V-192 | 24V-384 W |
| Output Current | 16 A |
| Max. Output Current | 16 A |
| Input Voltage | 5-24 Vdc |
| Output Channel | 1 |
| Color | Mono |
| Dimmable? | No |
| Operating Temperature | -4 ~ 140 °F |
| Casing Color | Black |
| Material | Aluminum |
| Installment | Surface / Flush Mounted |
| screw holder? | Yes |
| Connection Type | Terminal Block |
| Tactile? | No |
| Use | Indoor / Outdoor |
| LED Indicator | No |
| Length | 3.19 in |
| Width | 2.52 in |
| Height | 0.94 in |
| Weight | 2.47 oz |
It receives PWM (Pulse Width Modulation): each time you add one LED Amplifier, the connecting number of LEDs will be more than double, and numerous amplifiers can be connected. The amplifier receives the attenuated signal of the LED input and amplifies it, sending out 16A per output, allowing you to control multiple runs of single color LED Lights with one single color LED controller.
With this single color LED amplifier or also known as "data repeater", you can control up to 240W (12V) - 384W (24V) and 16A (or less) of single color LED Lights per output.
It improves the system with load capacity and has a minimal delay, but it can keep synchronism in a cascade. Therefore, they are required when the load capability of the single color LED Controller has exceeded, so they are used to increase the load and extend the signal in linear meters, achieving more homogenous effects and at greater distances without parallel routing cables.
Related products
