| Output Power | 12V-144 | 24V-288 W |
| Output Current | 4 A |
| Max. Output Current | 12 A |
| Input Voltage | 12-24 Vdc |
| Output Channel | 3 |
| Color | RGB |
| Dimmable? | No |
| Operating Temperature | -4 ~ 140 °F |
| Casing Color | White |
| Material | ABS |
| Installment | Surface / Flush Mounted |
| screw holder? | Yes |
| Connection Type | Terminal Block |
| Tactile? | No |
| IP Protection Grade | IP65 |
| Use | Indoor / Outdoor |
| LED Indicator | No |
| Length | 2.05 in |
| Width | 1.18 in |
| Height | 3,74 in |
| Weight | 3.53 oz |
This waterproof RGB amplifier or data repeater can carry the signal in linear meters of one controller through multiple runs of RGB LED lights. This allows multiple runs of RGBlights to be controlled LED by one controller.
A waterproof RGB LED Signal Repeater / amplifier that can be used to add more LED lighting products such as RGB LED modules, RGB LED strips or RGB LED wall washers to your existing RGB LED controller and will allow the additional lights to perform the same color changes as the RGB lights connected to the main controller. By adding this RGB amplifier and another power supply, you can add up to 144W (12V) or 288W (24V) of RGB lighting at 12-24Vdc and a maximum current of 12A (4A per channel) RGB lights.
RGB waterproof amplifier applicable to all types of LED controller. Besides being fully waterproofed, it can receive PWM (Pulse Width Modulation), and add in extra RGB amplifiers at one time in order to increase the numbers of LED lights installation.
How does it work?
According to the screen prompts of RGB amplifier on the panel, connect the in/out signal wire by order, ensure short circuit cannot occur between wires, then connect power wire for RGB amplifier.
Related products
