This item comes with a high-performance RGB LED touch remote control and an LED controller, adopting the most advanced PMW control technology, controlling all RGB LED products with four lines and three circuits (common anode), owning 640 thousand colors and 20 automatically changing modes to choose from.

In addition, it has a memory function (that is to say, the previous settings will be resumed when power on again). It is widely used in led RGB strip lights, LED modules, LED wall washers and so on.

With the technology of 2.4GHz high frequency wireless remote control, it has the characteristics of low power consumption, long distance transmission, and strong anti-interference ability, high-speed telecommunication, etc.

The remote looks fashionable and elegant, with simple and practical functions of color changing and brightness dimming, the capacitive touch screen design makes the remote easy to use.

The modular design and easy screwed terminals enable the controller easy to match with all kinds of led light products.

Please read our USER MANUAL for set-up instructions or contact our FREE tech support team.

Note:

• Please check whether the input voltage of the constant voltage power supply is in accordance with the controller, and please check the connection of both the cathode and anode, otherwise it will cause malfunction or damage on the controller.
• Please don't connect wires with power on. Please switch on again only when it is in right connection and no short circuit.
• Please keep your finger off the touch ring when installing the batteries, to improve its sensitivity, and use the remote (3 seconds later) after the batteries are installed. Please reinstall the batteries, if the touch ring is found low-sensitivity.
• Please do not use the controller in the place with widely range metal area or strong electromagnetic wave nearby, otherwise, the remote distance will be seriously affected.