The RGB RF 8-key controller adopts advanced micro-control unit, it is used for controlling a variety of lamps whose source of light is LED. For instance, flexible strip lights, wall washers, glass-curtain wall lights and so on; it has power-fail memory, synchronized indicator light show and other functions. 

At the same time, it has many advantages such as easy connection and simplicity to use. According to the actual need of customers, it can carry out jumpy changing, gradual changing, and other effects of change.

 Installation Method:

• Power Input Interface: Adopt two sheath wires as connecting wires, meanwhile, brown wire for positive (+) and blue wire for negative (-).

• Load Output Interface: Adopt four sheath wires as connecting wires, meanwhile, black wire for positive (+),  brown wire for red (R),  yellow wire for green (G) and blue wire for blue (B).

 How does it work?

1. Connect the load wire at first, following by the power wire; please ensure short circuit cannot occur between connecting wire before you turn on the power.

2. Adopt film button and RF for controlling, there are 8 buttons in all, the function of each key are as it follows:

(1): you could turn on/off controller at any time.

(2): Play/pause button, it is convenient for you to see the static effect of LED.

S (3) +: The step of the speed changes, adds 1 by each pressing.

S- (4): The step of the speed changes, subtracts 1 by each pressing.

B+ (5): A brightness control button, adds 1 by each pressing.

B- (6): A brightness control button, subtracts 1 by each pressing.

M+ (7): The NO. of patterns add 1 by each pressing.

M- (8): The NO. of patterns subtract 1 by each pressing.