10mm COB LED Strip RGB+Warm White 24V 21W/m 784LED/m 16.4ft

COB LED Strip 24V 21W/m RGB+Warm White 784 LEDs/m, 10mm PCB IP33 x5m

COB chips typically have 9 or more diodes, and they only have one circuit and two contacts, regardless of the diode count. This design is the reason for the panel or tube appearance of a COB LED light; on the other hand, an SMD light appears as a series of smaller lights, like illuminated points. Some COB chips are also known for producing high lumens (brightness) with less power, a wide viewing angle, and other excellent related characteristics that make COBs widely used.

COB technology offers greater levels of light spread, eliminating those dark-then-bright patches created by narrow-beam fixtures. COBs also have greater reliability and a longer lifespan than SMD LEDs. They come with 3M adhesive tape on the back, high color efficiency, and uniform illumination. A COB LED achieves higher brightness with a more uniform appearance than its predecessors.

Fun Facts:

New Technology: The yellow layer in the middle of the COB chip is a single phosphor layer, allowing for complete control of color temperatures and CRI. This type of LED technology allows the chip density of our strip to reach up to 784 chips per meter, promising much greater flexibility and improved brightness compared to other LED technologies.

High Luminous Flux: Our dynamic color RGB+Warm White COB strip delivers 80lm/W, plus a CRI of >90 Ra, making it perfect for ceilings, walls, stairs, interior lighting, and more!

Low Energy Consumption: At only 21W per meter, it's ideal for replacing any 630W incandescent light fixture, whether it's traditional tubes or bulbs. For smaller projects, just one meter of our 25W/m COB strip light can replace any traditional 126W light fixture.

Multiple Applications: Due to its greater flexibility and higher brightness, this COB strip light is perfect for indoor, home, and commercial lighting, ceilings, walls, clubs, bars, lounges, living rooms, conference rooms, task lighting, showrooms, displays, shelves, cabinets, wardrobes, or outdoors after proper installations have been made to protect the COB strip light.

Adhesive Backing and Flexibility: With a 3M "Peel-and-Stick" self-adhesive tape, the flexibility of the strip allows you to install your COB strip light on any smooth, clean surface. Refer to the manual or data sheet for connection diagrams. If you are unsure, professional installation is recommended.

Adjustable: The light strip is manufactured to be cut to any desired length up to 5m without losing functionality. It can be cut into 24-LED segments (every 4.54cm) at the marked sections and assembled with a simple solder, or you can use our connectors for easy installation.

Tips before buying:

 When comparing COB strip lighting between companies, if both competing strips use the same chips, note how many LEDs are on the strip and look at the lumen output (luminous flux) to determine the brightness.

 When looking for bright COB light strips, be sure to compare apples to apples; not all COB strips are made the same and with the same data specifications.

 If you have questions about the LED strips you need for your projects, contact our FREE TECHNICAL SUPPORT TEAM.

Note:

■ This product should ONLY be used with a 24V DC power supply. The supply voltage must be the same as the voltage required by the LED strip. If it is lower, the intensity of the strip will be lower than expected. If it is higher than required, it may burn out the LED strip.

■ You can use a power supply with current and power (watts) equal to or greater than the total consumption of the LED strip, but not with values ​​lower than the total consumption of the strip, as this would impair its operation.

■ If you wish to use dimmers to regulate light intensity or controllers to select the color tone, the use of amplifiers is required. Please contact us so we can provide the best possible assistance for your project.

Precautions:

■ DO NOT expose this strip to sunlight due to UV damage.

■ DO NOT bend this LED Strip less than 15mm / 0.59".

■ DO NOT bend it horizontally.

■ Any of the above may damage the LED Strip and VOID THE WARRANTY.

Technical Specifications